Small business conference and training room with a professional AV system

Conference System Case Study

Small Business Conference Room and Training Room System

Six IP wired conference positions, video conferencing, 8 ceiling speakers, digital audio processing, wireless presentation, and central control in one practical meeting and training room.

Contact Us

Project Overview

Project Overview

SPON delivered an integrated conference and training room system for a small and medium-sized enterprise. The supplied configuration combines a video-conferencing endpoint and HD conference camera, one LCN-8003C-L chairman unit, five LCN-8003D-L delegate units, eight SAP-TY65 ceiling speakers, digital audio processing, HDMI switching, wireless presentation, and central control.

The system gives the room a fixed discussion workflow for formal meetings while supporting training, presentations, and remote collaboration.

Project TypeSmall business conference room and training room system
ApplicationsInternal meetings, staff training, presentations, wireless sharing, and remote collaboration
Conference Scale1 chairman position + 5 delegate positions
Conference PlatformSPON LCN-8000 IP wired conference system
Room Audio8 SAP-TY65 ceiling speakers, SAP-5502A35 digital amplifier, and SAP-F88 audio processor
Video and SharingVideo-conferencing endpoint, HD conference camera, USB AV kit, 8×8 HDMI matrix, 3 wireless presentation devices, and 2 video capture cards
Room ControlLCS-C4 central controller, LCS-SOFT2 programming software, and SAP-S80 power sequencer

Project Requirements

Project Requirements and Challenges

The customer needed more than stand-alone microphones and speakers. One room had to accommodate structured meetings, internal training, presentations, and remote communication. The required system therefore needed clear speech reinforcement, flexible AV input, controlled signal routing, and a simpler operating process for daily use.

01

Dedicated speaking positions

Provide six dedicated speaking positions for the chairman and participants.

02

Even audio distribution

Distribute speech and programme audio evenly through the room.

03

Local and remote workflows

Support local and remote meeting workflows with a video-conferencing endpoint, HD camera, and USB AV connection.

04

Flexible AV sources

Allow wired HDMI switching, wireless presentation, and video capture for different meeting and training sources.

05

Programmed operation

Coordinate AV equipment, room control, and power management in one programmed workflow.

Training room conference system with fixed gooseneck microphone positions

SPON Solution

SPON Conference Room Solution

SPON IP wired conference microphone units installed at the meeting table
01. Six-Position IP Wired Conference Discussion

Six-Position IP Wired Conference Discussion

The LCN-8000-PRO conference controller is configured with one LCN-8003C-L chairman unit and five LCN-8003D-L delegate units. This gives the room six fixed gooseneck microphone positions for organized discussion.

The controller supports conference-unit management and camera-control interfaces. Functions such as attendance, voting, and camera tracking require final configuration and commissioning, so they are not presented here as separately confirmed project functions.

02. Distributed Ceiling-Speaker Sound Reinforcement

Distributed Ceiling-Speaker Sound Reinforcement

Eight SAP-TY65 coaxial ceiling speakers distribute speech, training material, and presentation audio through the room. Each speaker is specified with a 6.5-inch low-frequency driver, a 1-inch high-frequency driver, 60 Hz–20 kHz frequency response, and a 150° coverage angle at 1 kHz/−6 dB.

One SAP-5502A35 1U digital amplifier drives the sound-reinforcement system. Its listed specification includes at least 350 W × 2 output at 8 Ω, Dante/AES67 network-audio compatibility, and DSP processing functions.

SAP-TY65 ceiling speaker installed in a business conference room
SPON conference controller and room AV equipment in an equipment rack
03. Audio Processing for Meetings and Training

Audio Processing for Meetings and Training

The SAP-F88 digital audio processor connects conference audio, room reinforcement, and external AV sources. Its listed configuration includes at least eight microphone/line inputs, eight balanced line outputs, USB audio support, and DSP functions including feedback suppression, echo cancellation, noise suppression, automatic gain control, equalization, delay, and crossover.

The USB audio interface provides an integration path for supported soft video-conference applications. One USB omnidirectional microphone and USB camera kit is also included for computer-based meetings.

04. Video Conferencing and Conference Video

Video Conferencing and Conference Video

The configuration includes one video-conferencing endpoint and one HD conference camera. The supplied camera requirements include 1080p output formats, at least 12× optical zoom, pan/tilt movement, VISCA control compatibility, automatic white balance, auto exposure, and auto focus.

These devices support the room’s remote-meeting video workflow. Active-speaker camera tracking, if required, is subject to the final system programming and commissioning.

Conference room with video conferencing equipment and dual displays
Training room configured for presentation sharing and conference discussion
05. HDMI Switching, Wireless Presentation, and Video Capture

HDMI Switching, Wireless Presentation, and Video Capture

One LCS-8008HTP HDMI matrix package manages presentation signals. The listed package includes an 8-input/8-output HDMI matrix, three wireless presentation devices, and two video capture cards.

The matrix supports 4K@30 Hz HDMI input/output switching. The supplied requirements for the wireless presentation devices and capture cards specify support up to 4K@60 Hz. Final screen routing is set according to the installed displays and room workflow.

06. Central Control and Sequenced Power Management

Central Control and Sequenced Power Management

The LCS-C4 central controller, LCS-SOFT2 programming software, and SAP-S80 power sequencer form the management layer. Supplied with programming and a tablet interface, the LCS-C4 provides serial, relay, infrared, and I/O interfaces for coordinated room-device control.

The SAP-S80 manages sequenced power-up and shutdown, helping staff prepare and close the room through an orderly operating procedure instead of controlling each device separately.

Central control and AV equipment rack for the conference room

System Workflow

How the Integrated System Works

STEP 01

1. The chairman and delegate units send meeting speech to the LCN-8000-PRO conference controller.

STEP 02

2. The SAP-F88 processes conference and external audio before it is sent to the SAP-5502A35 amplifier and eight SAP-TY65 ceiling speakers.

STEP 03

3. The video-conferencing endpoint, HD camera, USB AV kit, and SAP-F88 USB audio interface support local and remote meeting connections.

STEP 04

4. HDMI sources, wireless presentation devices, and video capture cards are routed through the LCS-8008HTP for the configured presentation and capture paths.

STEP 05

5. The LCS-C4 and SAP-S80 coordinate programmed device control and equipment power sequencing.

Business conference system with microphone positions, dual displays, and conference camera

Project Result

Project Result

After installation, the customer gained a purpose-built meeting and training environment rather than a collection of separate devices. The room now combines fixed conference discussion, distributed sound reinforcement, video-conferencing hardware, presentation switching, and centralized control.

  • Six dedicated IP wired conference positions: one chairman and five delegates.
  • Video conferencing, HD camera, USB AV, wireless presentation, and video capture in one room solution.
  • Programmed central control and sequenced power management for more consistent daily operation.

System Configuration

Core Equipment Used

EquipmentModel / ConfigurationQty.Role in This Project
Video-conferencing endpointModel not specified1Dedicated video-conferencing terminal for the room.
HD conference cameraModel not specified1Conference video capture for the remote-meeting workflow.
Coaxial ceiling speakerSAP-TY658Distributed room sound reinforcement.
1U digital amplifierSAP-5502A351Drives the ceiling-speaker system.
IP wired conference controllerLCN-8000-PRO1Manages the conference discussion system.
IP wired chairman unitLCN-8003C-L1Chairman speaking position.
IP wired delegate unitLCN-8003D-L5Five participant speaking positions.
Digital audio processorSAP-F881Processes conference, AV, and room audio.
Power sequencerSAP-S801Provides sequenced equipment power control.
8×8 HDMI matrix packageLCS-8008HTP1Switches HDMI signals; includes 3 wireless presentation devices and 2 video capture cards.
Central controller with programming and tabletLCS-C41Coordinates programmed control of room equipment.
Central-control programming softwareLCS-SOFT21Supports central-control programming and configuration.
USB omnidirectional microphone and USB cameraModel not specified1Computer-based USB AV connection.
Dual handheld wireless microphone systemLCS-5306A1Two handheld microphones for flexible presenters or training use.

Conference System FAQ

Frequently Asked Questions

How do I choose between a wired and a wireless conference system?

A wired conference system is a strong choice for fixed seating, long-term installation, and rooms where predictable connections are important. A wireless system is better suited to flexible seating, temporary layouts, and spaces where visible table cabling should be minimized. The right choice depends on room layout, expected use, expansion needs, and installation conditions.

What does a digital audio processor do in a conference room?

A digital audio processor manages and optimizes audio signals between microphones, programme sources, amplifiers, loudspeakers, and remote-meeting equipment. Typical processing may include automatic gain control, equalization, feedback suppression, echo cancellation, noise reduction, routing, and delay adjustment. The exact functions depend on the system design and required interfaces.

What is needed for a meeting room to support hybrid meetings?

A hybrid meeting room normally requires clear voice pickup, room loudspeakers, a camera with suitable framing, display and content-sharing paths, and a connection method for the selected meeting platform. A correctly configured audio workflow is essential to prevent echo, feedback, and poor intelligibility for remote participants.

How should ceiling speakers be planned for a meeting or training room?

Speaker quantity and placement should be based on room dimensions, ceiling height, seating layout, acoustic conditions, programme material, and required sound-pressure level. Distributed ceiling speakers can help provide even coverage, but final spacing and amplifier configuration should be designed for the actual room.

Why use central control and power sequencing in a conference room?

Central control can bring displays, audio devices, signal switching, cameras, and other room equipment into one operating interface. A power sequencer helps start and shut down equipment in a defined order, which can simplify daily operation and support more orderly system management.

Plan Your Project

Planning a Small Business Meeting or Training Room?

This project demonstrates how a small and medium-sized business can combine IP wired discussion, distributed ceiling-speaker audio, video conferencing, presentation sharing, and central control in one practical room.

Contact SPON to plan a conference and training room system based on your room layout, participant count, AV workflow, and budget.